Back to Blog
Shure qlxd4 audio overload element good7/10/2023 ![]() ![]() Press any control button to activate the backlight.Īlign with the receiver IR port during an IR sync for automated transmitter programming. Red = low battery or battery error (see Troubleshooting).Also carries Dante digital audio and control signals for audio distribution, monitoring, and recording - see Dante Network topic. ![]() Also carries Dante digital audio and control signals for audio distribution, monitoring, and recording - see Dante Network topic.Ĭonnect to an Ethernet network to enable remote device control via Wireless Workbench. ⑤ Balanced XLR Audio Output (one per channel)Ĭonnect to an Ethernet network to enable remote device control via Wireless Workbench software. Passes the RF signal from Antenna A and Antenna B to one additional receiver. Press the ▲▼ gain buttons on the front of the receiver to incrementally adjust gain from -18 to +42 dB. Note: In Frequency Diversity mode, simultaneous blinking of the red and yellow audio LEDs indicates that diversity audio has been routed to this channel. Indicate average and peak audio levels: LED Indicate the RF signal strength from the transmitter: Note: the receiver will not output audio unless one blue LED is illuminated.
0 Comments
Read More
Leave a Reply. |